A refrigerated dryer, usually referred to as a chiller, cools compressed air, which allows water in the compressed air to condense and break free the air itself, making it a crucial air gadget thing for programs that require compressed air to be dried to a low dew factor. As you could see from the image, water cannot be compressed in the course of air compression, so it needs to be eliminated from the compressor (if it has a water evacuator drain), or from the garage tank, chiller dryer, and many others.
So the way to measure the good or awful of a refrigerated air dryer? In layman’s phrases, the dew factor. Dew factor is divided into two classes: atmospheric stress dew factor (ecosystem pressure point), which is the dew factor temperature at atmospheric stress, and pressure dew point (stress Dew point) compressed air whilst the gaseous water content reaches saturation temperature is referred to as the dew factor temperature. refrigerated air dryers are typically designed with the stress dew factor as the same old.
however is the temperature displayed on the refrigerated air dryer sincerely the actual pressure dew point temperature? For maximum of the device on the market, due to the excessive rate of the stress dew factor sensor, the real temperature displayed at the refrigerated air dryer is normally not the true strain dew point, for instance, if the range seen on the show is 1~3℃, that is definitely the temperature of the refrigerant related to the sensor detected internally, whether this temperature is accurately close to the true stress dew factor temperature depends on every producer’s the position of the sensor relies upon on the position of every producer. consequently, the greater correct the region, the higher the healthy among the strain dew point and the display dew point. For the display temperature, the lower the show dew point temperature, the decrease the genuine moisture content material of the compressed air.
The stress dew factor that may be carried out by the refrigerated air dryer is three°C/five°C/7°C, up to the necessities of within the compressed air satisfactory fashionable ISO 8573-1:2010, and distinctive merchandise are selected according to distinctive customer desires. similarly to this, Atlas Copco’s unique three-in-one heat exchanger can additionally heat up dry compressed air, in addition decreasing the relative humidity of compressed air and preventing condensation from forming in the downstream piping, giving customers a better experience.
For more information, you can contact Lingyu Machinery ~ 2~10C dew point refrigerated compressed air dryer.
Water Removal Refrigerated Air Dryer